.github/build-canary-i386

@@ -1 +0,0 @@
-1

.github/build-canary-v3

@@ -1 +0,0 @@
-1

.github/build-nest-i386

@@ -1 +0,0 @@
-1

.github/build-nest-v3

@@ -1 +0,0 @@
-1

.github/release-canary-i386

@@ -1 +0,0 @@
-1

.github/release-canary-v3

@@ -1 +0,0 @@
-5

.github/release-nest-i386

@@ -1 +0,0 @@
-2

.github/release-nest-v3

@@ -1 +0,0 @@
-2

.github/workflows/build-canaryi386.yml

@@ -1,37 +0,0 @@
-name: PikaOS Package Build Only (Canary) (i386)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/build-canary-i386'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:canaryi386
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh

.github/workflows/build-canaryv3.yml

@@ -1,37 +0,0 @@
-name: PikaOS Package Build Only (Canary) (amd64-v3)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/build-canary-v3'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:canaryv3
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh

.github/workflows/build-nesti386.yml

@@ -1,37 +0,0 @@
-name: PikaOS Package Build Only (i386)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/build-nest-i386'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:nesti386
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh

.github/workflows/build-nestv3.yml

@@ -1,37 +0,0 @@
-name: PikaOS Package Build Only (amd64-v3)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/build-nest-v3'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:nestv3
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh

.github/workflows/release-canaryi386.yml

@@ -1,40 +0,0 @@
-name: PikaOS Package Build & Release (Canary) (i386)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/release-canary-i386'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:canaryi386
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh
-
-    - name: Release Package
-      run: ./release.sh

.github/workflows/release-canaryv3.yml

@@ -1,40 +0,0 @@
-name: PikaOS Package Build & Release (Canary) (amd64-v3)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/release-canary-v3'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:canaryv3
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh
-
-    - name: Release Package
-      run: ./release.sh

.github/workflows/release-nesti386.yml

@@ -1,40 +0,0 @@
-name: PikaOS Package Build & Release (i386)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/release-nest-i386'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:nesti386
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh
-
-    - name: Release Package
-      run: ./release.sh

.github/workflows/release-nestv3.yml

@@ -1,40 +0,0 @@
-name: PikaOS Package Build & Release (amd64-v3)
-
-on:
-  push:
-    branches:
-      - main
-    paths:
-      - '.github/release-nest-v3'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container:
-      image: ghcr.io/pikaos-linux/pikaos-builder:nestv3
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-    
-    - name: Update APT Cache
-      run: apt-get update -y
-
-    - name: Set Build Config
-      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
-
-    - name: Build Package
-      run: ./main.sh
-
-    - name: Release Package
-      run: ./release.sh

.github/workflows/release.yml

@@ -0,0 +1,40 @@
+name: PikaOS Package Release
+
+on:
+  workflow_dispatch
+
+jobs:
+  build:
+    runs-on: self-hosted
+    container:
+      image: ubuntu:22.10
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+  
+    - name: Install needed packages
+      run: apt update && apt install software-properties-common sudo git bc gpg gpg-agent bison build-essential ccache cpio fakeroot flex git kmod libelf-dev libncurses5-dev libssl-dev lz4 qtbase5-dev rsync schedtool wget zstd tar reprepro dpkg-sig devscripts dh-make -y
+
+    - name: Import GPG key
+      id: import_gpg
+      uses: crazy-max/ghaction-import-gpg@v5
+      with:
+        gpg_private_key: ${{ secrets.GPG_PRIVATE_KEY }}
+        passphrase: ${{ secrets.PASSPHRASE }}
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Build Package
+      run: ./main.sh
+
+    - name: Release Package
+      run: ./release.sh

.github/workflows/release_i386.yml

@@ -0,0 +1,40 @@
+name: PikaOS Package Release (i386)
+
+on:
+  workflow_dispatch
+
+jobs:
+  build:
+    runs-on: self-hosted
+    container:
+      image: ubuntu:22.10
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+  
+    - name: Install needed packages
+      run: apt update && apt install software-properties-common sudo git bc gpg gpg-agent bison build-essential ccache cpio fakeroot flex git kmod libelf-dev libncurses5-dev libssl-dev lz4 qtbase5-dev rsync schedtool wget zstd tar reprepro dpkg-sig devscripts dh-make -y
+
+    - name: Import GPG key
+      id: import_gpg
+      uses: crazy-max/ghaction-import-gpg@v5
+      with:
+        gpg_private_key: ${{ secrets.GPG_PRIVATE_KEY }}
+        passphrase: ${{ secrets.PASSPHRASE }}
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Build Package
+      run: ./main32.sh
+
+    - name: Release Package
+      run: ./release.sh

LICENSE.md

@@ -1,24 +0,0 @@
-MIT License (With DPKG packaging compatibility)
-
-Copyright (c) 2024 PikaOS
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-
-Notes:
-The files covered by this license are any files and directories in the root of this repository (including but not limited to: `main.sh`, `release.sh`, and `.github`), with the exception of the `debian` directory and its contents if `debian/copyright` exists, and declares any files or directories as a different LICENSE/COPYRIGHT.

base-files-not-yet/debian/NEWS

@@ -1,9 +0,0 @@
-base-files (13.2) unstable; urgency=medium
-
-  By default, snippets for Bourne and Bourne-compatible shells (*.sh)
-  in /etc/profile.d will only be sourced by /etc/profile if they
-  conform to a sensible regexp including only some ASCII characters,
-  as it already happens with cron entries and the like. Previously,
-  the behaviour was not really well defined.
-
- -- Santiago Vila <sanvila@debian.org>  Fri, 03 May 2024 18:04:00 +0200

base-files-not-yet/debian/base-files.lintian-overrides

@@ -1,35 +0,0 @@
-#
-# Permissions 0700 on /root are intentional as people expect
-# the /root directory to be more private than /home/* directories.
-#
-base-files: non-standard-dir-perm 0700 != 0755 [root/]
-#
-# The /etc/os-release symlink is relative on purpose to avoid breaking dracut.
-# See Bug #755394 for details.
-#
-base-files: relative-symlink ../usr/lib/os-release [etc/os-release]
-#
-# The purpose of having licenses here is precisely to allow
-# other packages to reference them.
-#
-base-files: extra-license-file [usr/share/common-licenses/Artistic]
-base-files: extra-license-file [usr/share/common-licenses/BSD]
-base-files: extra-license-file [usr/share/common-licenses/GPL-1]
-base-files: extra-license-file [usr/share/common-licenses/GPL-2]
-base-files: extra-license-file [usr/share/common-licenses/GPL-3]
-base-files: extra-license-file [usr/share/common-licenses/LGPL-2]
-base-files: extra-license-file [usr/share/common-licenses/LGPL-2.1]
-base-files: extra-license-file [usr/share/common-licenses/LGPL-3]
-#
-# These links really should be relative.
-#
-base-files: relative-symlink usr/bin [bin]
-base-files: relative-symlink usr/lib [lib]
-base-files: relative-symlink usr/lib64 [lib64]
-base-files: relative-symlink usr/libx32 [libx32]
-base-files: relative-symlink usr/sbin [sbin]
-#
-# We need these for the relevant architectures.
-#
-base-files: non-multi-arch-lib-dir [usr/lib64/]
-base-files: non-multi-arch-lib-dir [usr/libx32/]

base-files-not-yet/debian/clean

@@ -1 +0,0 @@
-debian/triggers

base-files-not-yet/debian/control

@@ -1,23 +0,0 @@
-Source: base-files
-Section: admin
-Priority: required
-Maintainer: Santiago Vila <sanvila@debian.org>
-Standards-Version: 4.6.2
-Build-Depends: debhelper-compat (= 13), debhelper (>= 13.10~)
-Rules-Requires-Root: binary-targets
-
-Package: base-files
-Provides: base, usr-is-merged
-Architecture: any
-Pre-Depends: awk
-Depends: ${misc:Depends}
-Essential: yes
-Priority: required
-Replaces: base, miscutils, dpkg (<= 1.15.0)
-Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
-Multi-Arch: foreign
-Description: Debian base system miscellaneous files
- This package contains the basic filesystem hierarchy of a Debian system, and
- several important miscellaneous files, such as /etc/debian_version,
- /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
- and the text of several common licenses in use on Debian systems.

base-files-not-yet/debian/copyright

@@ -1,37 +0,0 @@
-Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Comment:
- This is the Debian prepackaged version of the Debian Base System
- Miscellaneous files. These files were written by Ian Murdock
- <imurdock@debian.org> and Bruce Perens <bruce@pixar.com>.
- .
- This package was first put together by Bruce Perens <Bruce@Pixar.com>,
- from his own sources.
-
-Files: *
-Copyright: (C) 1995-2011 Software in the Public Interest
-License: GPL-2+
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- .
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
- .
- On Debian systems, the complete text of the GNU General
- Public License can be found in `/usr/share/common-licenses/GPL'.
-Comment:
- The Artistic License in /usr/share/common-licenses is the one coming
- from Perl and its SPDX name is "Artistic License 1.0 (Perl)".
-
-Files: licenses/GFDL-*
-       licenses/GPL-*
-       licenses/LGPL-*
-Copyright: 1989-2008 Free Software Foundation, Inc.
-License: verbatim
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-Comment:
- The GNU licenses in /usr/share/common-licenses were taken from ftp.gnu.org.

base-files-not-yet/debian/gbp.conf

@@ -1,4 +0,0 @@
-[DEFAULT]
-upstream-branch = master
-debian-branch = master
-debian-tag = %(version)s

base-files-not-yet/debian/postrm

@@ -1,11 +0,0 @@
-#!/bin/sh
-set -e
-
-if [ "$1" = "remove" ]; then
-  for d in #USR_MERGE_MULTILIB#; do
-    # Remove DEP17 M4 protective diversions
-    dpkg-divert --quiet --package base-files --remove --no-rename --divert "/.$d.usr-is-merged" "/$d"
-  done
-fi
-
-#DEBHELPER#

base-files-not-yet/debian/preinst

@@ -1,32 +0,0 @@
-#!/bin/sh
-set -e
-
-if [ "$1" = "install" ] || [ "$1" = "upgrade" ]; then
-  for d in bin lib lib32 lib64 libo32 lib64 sbin; do
-    if [ -d "$DPKG_ROOT/$d" ] && [ ! -L "$DPKG_ROOT/$d" ]; then
-      cat <<EOF
-
-
-******************************************************************************
-*
-* The base-files package cannot be installed because this system has a
-* split /usr.
-*
-* Please install the usrmerge package to convert this system to merged-/usr.
-*
-* For more information please read https://wiki.debian.org/UsrMerge.
-*
-******************************************************************************
-
-
-EOF
-      exit 1
-    fi
-  done
-  for d in #USR_MERGE_MULTILIB#; do
-    # Install DEP17 M4 protective diversions
-    dpkg-divert --quiet --package base-files --add --no-rename --divert "/.$d.usr-is-merged" "/$d"
-  done
-fi
-
-#DEBHELPER#

base-files-not-yet/debian/source/format

@@ -1 +0,0 @@
-3.0 (quilt)

base-files-not-yet/debian/timestamps

@@ -1,21 +0,0 @@
-#!/bin/sh
-set -e
-BUILD_DATE=$(dpkg-parsechangelog -S Date)
-touch -d "${BUILD_DATE}" etc/*
-touch -d "${BUILD_DATE}" motd/*
-touch -d "${BUILD_DATE}" origins/*
-touch -d "${BUILD_DATE}" share/*
-touch -d "1996-12-16 02:58:50 UTC" licenses/Artistic
-touch -d "1999-08-26 12:06:20 UTC" licenses/BSD
-touch -d "2004-12-19 20:30:25 UTC" licenses/Apache-2.0
-touch -d "2010-03-23 23:34:05 UTC" licenses/GPL-1
-touch -d "2010-03-23 23:34:05 UTC" licenses/GPL-2
-touch -d "2010-03-23 23:34:05 UTC" licenses/LGPL-2.1
-touch -d "2017-04-03 11:00:00 UTC" licenses/MPL-1.1
-touch -d "2017-04-03 20:00:00 UTC" licenses/MPL-2.0
-touch -d "2017-04-25 22:26:15 UTC" licenses/CC0-1.0
-touch -d "2017-09-30 07:14:21 UTC" licenses/GPL-3
-touch -d "2017-09-30 07:14:21 UTC" licenses/LGPL-3
-touch -d "2017-09-30 07:15:28 UTC" licenses/GFDL-1.2
-touch -d "2022-02-10 06:14:38 UTC" licenses/GFDL-1.3
-touch -d "2022-02-10 06:14:38 UTC" licenses/LGPL-2

base-files-not-yet/etc/debian_version

@@ -1 +0,0 @@
-trixie/sid

base-files-not-yet/etc/host.conf

@@ -1 +0,0 @@
-multi on

base-files-not-yet/etc/issue

@@ -1,2 +0,0 @@
-PikaOS 4 \n \l
-

base-files-not-yet/etc/issue.net

@@ -1 +0,0 @@
-PikaOS 4

base-files-not-yet/etc/os-release

@@ -1,13 +0,0 @@
-PRETTY_NAME="PikaOS 4"
-NAME="PikaOS"
-VERSION_ID="4"
-VERSION="4"
-VERSION_CODENAME=nest
-ID=pika
-HOME_URL="https://www.pika-os.com/"
-SUPPORT_URL="https://discord.gg/6HKR2YRvNg"
-BUG_REPORT_URL="https://git.pika-os.com/"
-PRIVACY_POLICY_URL="https://www.pika-os.com/"
-ID_LIKE=debian
-DEBIAN_CODENAME=sid
-LOGO=pika-logo

base-files-not-yet/motd/10-uname

@@ -1,2 +0,0 @@
-#!/bin/sh
-uname -snrvm

base-files-not-yet/origins/pika

@@ -1,3 +0,0 @@
-Vendor: PikaOS
-Vendor-URL: https://ppa.pika-os.com/
-Bugs: https://git.pika-os.com/

base-files-not-yet/share/dot.bashrc

@@ -1,19 +0,0 @@
-# ~/.bashrc: executed by bash(1) for non-login shells.
-
-# Note: PS1 is set in /etc/profile, and the default umask is defined
-# in /etc/login.defs. You should not need this unless you want different
-# defaults for root.
-# PS1='${debian_chroot:+($debian_chroot)}\h:\w\$ '
-# umask 022
-
-# You may uncomment the following lines if you want `ls' to be colorized:
-# export LS_OPTIONS='--color=auto'
-# eval "$(dircolors)"
-# alias ls='ls $LS_OPTIONS'
-# alias ll='ls $LS_OPTIONS -l'
-# alias l='ls $LS_OPTIONS -lA'
-#
-# Some more alias to avoid making mistakes:
-# alias rm='rm -i'
-# alias cp='cp -i'
-# alias mv='mv -i'

basefiles/debian/README

@@ -4,10 +4,10 @@ Frequently Asked Questions about base-files
 * Questions about /etc/issue and /etc/debian_version:
 
 Q. I upgraded my system to the testing distribution and now my /etc/issue
-says "trixie/sid". Should it not read "trixie" or "testing"?
+says "bookworm/sid". Should it not read "bookworm" or "testing"?
 
 Q. I upgraded my system to the unstable distribution and now my /etc/issue
-says "trixie/sid". Should it not read "sid" or "unstable"?
+says "bookworm/sid". Should it not read "sid" or "unstable"?
 
 A. That would be nice, but it is not possible because of the way the
 testing distribution works. Packages uploaded for unstable reach
@@ -17,9 +17,9 @@ testing. You should consider the testing and unstable distributions as
 two sides of the same coin. Since the base-files package in testing
 was initially uploaded for unstable, the only sensible /etc/issue to
 have is one that is both valid for testing and unstable, hence
-"trixie/sid" (or whatever is appropriate).
+"bookworm/sid" (or whatever is appropriate).
 
-Q. Why "trixie/sid" and not "testing/unstable" as it used to be?
+Q. Why "bookworm/sid" and not "testing/unstable" as it used to be?
 
 A. The codename is a little bit more informative, as the meaning of
 "testing" changes over time.
@@ -95,12 +95,5 @@ freedom to remove those directories without them being created again
 when base-files is upgraded. Therefore, if you are running any sort of
 compliance tests, you should do it on newly installed systems only.
 
-Q. My system (when I do "dpkg -s base-files") shows /etc/profile as
-an "obsolete conffile". Is this ok?
-
-A. Yes. The file was handled by base-files as a conffile in the dpkg sense
-in the past, so dpkg may consider the file as an obsolete conffile.
-There is currently not a way to tell dpkg to unregister it as a conffile
-without removing it, so the best approach for now is to do nothing about it.
 
 Santiago Vila <sanvila@debian.org>

basefiles/debian/base-files.dirs

@@ -1,3 +1,4 @@
+bin
 boot
 dev
 etc
@@ -7,14 +8,20 @@ etc/profile.d
 etc/skel
 etc/update-motd.d
 home
+lib
+lib/systemd/system
 proc
 root
 run
+sbin
 sys
 tmp
 usr
+usr/bin
 usr/games
 usr/include
+usr/lib
+usr/sbin
 usr/share
 usr/share/base-files
 usr/share/common-licenses

basefiles/debian/base-files.links

@@ -1,4 +1,4 @@
-usr/share/doc/base-files/README    usr/share/doc/base-files/FAQ
+usr/share/doc/base-files/README    usr/share/doc/base-files/FAQ 
 usr/share/common-licenses/GFDL-1.3 usr/share/common-licenses/GFDL
 usr/share/common-licenses/LGPL-3   usr/share/common-licenses/LGPL
 usr/share/common-licenses/GPL-3    usr/share/common-licenses/GPL

basefiles/debian/base-files.lintian-overrides

@@ -0,0 +1,22 @@
+#
+# Permissions 0700 on /root are intentional as people expect
+# the /root directory to be more private than /home/* directories.
+#
+base-files: non-standard-dir-perm root/ 0700 != 0755
+#
+# The /etc/os-release symlink is relative on purpose to avoid breaking dracut.
+# See Bug #755394 for details.
+#
+base-files: symlink-should-be-absolute etc/os-release ../usr/lib/os-release
+#
+# The purpose of having licenses here is precisely to allow
+# other packages to reference them.
+#
+base-files: extra-license-file usr/share/common-licenses/Artistic
+base-files: extra-license-file usr/share/common-licenses/BSD
+base-files: extra-license-file usr/share/common-licenses/GPL-1
+base-files: extra-license-file usr/share/common-licenses/GPL-2
+base-files: extra-license-file usr/share/common-licenses/GPL-3
+base-files: extra-license-file usr/share/common-licenses/LGPL-2
+base-files: extra-license-file usr/share/common-licenses/LGPL-2.1
+base-files: extra-license-file usr/share/common-licenses/LGPL-3

basefiles/debian/base-files.maintscript

@@ -0,0 +1 @@
+rm_conffile /etc/default/motd-news 11ubuntu11~ base-files

basefiles/debian/changelog

@@ -0,0 +1,17 @@
+base-files (12.2ubuntu99-99pika6) kinetic; urgency=medium
+
+  * Move profile.d scripts to pika-baseos
+ 
+ -- Ward Nakchbandi <hotrod.master@hotmail.com>  Sat, 15 Oct 2022 20:50:00 +0300
+
+base-files (12.99pika2) kinetic; urgency=medium
+
+  * Fix Icons sizes
+ 
+ -- Ward Nakchbandi <hotrod.master@hotmail.com>  Sat, 15 Oct 2022 20:50:00 +0300
+
+base-files (12.99pika1) kinetic; urgency=medium
+
+  * PikaOS rebranding
+ 
+ -- Ward Nakchbandi <hotrod.master@hotmail.com>  Sat, 15 Oct 2022 20:50:00 +0300

basefiles/debian/check-md5sum-etc

@@ -0,0 +1,8 @@
+#!/bin/sh
+file=$1
+md5=$(md5sum share/${file} | cut -f 1 -d " ")
+if ! grep -q "$md5" share/${file}.md5sums; then
+  echo Error: share/${file}.md5sums is incomplete.
+  echo Need to add "$md5" with current version.
+  exit 1
+fi

basefiles/debian/clean

@@ -0,0 +1,3 @@
+debian/postinst
+debian/copyright
+locale-check

basefiles/debian/control

@@ -0,0 +1,36 @@
+Source: base-files
+Section: admin
+Priority: required
+Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
+XSBC-Original-Maintainer: Santiago Vila <sanvila@debian.org>
+Standards-Version: 4.1.3
+Build-Depends: debhelper-compat (= 13)
+
+Package: base-files
+Provides: base
+Architecture: any
+Pre-Depends: awk
+Depends: ${misc:Depends}, ${shlibs:Depends}, libcrypt1 (>= 1:4.4.10-10ubuntu3)
+Essential: yes
+Priority: required
+Replaces: base, miscutils, dpkg (<= 1.15.0)
+Breaks: debian-security-support (<< 2019.04.25), initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
+ , ubuntu-server (<< 1.453)
+Multi-Arch: foreign
+Description: Debian base system miscellaneous files
+ This package contains the basic filesystem hierarchy of a Debian system, and
+ several important miscellaneous files, such as /etc/debian_version,
+ /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
+ and the text of several common licenses in use on Debian systems.
+
+Package: motd-news-config
+Architecture: all
+Priority: optional
+Breaks: base-files (<< 11ubuntu11)
+Replaces: base-files (<< 11ubuntu11)
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Configuration for motd-news shipped in base-files
+ This package contains the configuration read by the motd-news script
+ shipped in the base-files package.
+ .
+ Install this package if you want motd-news to be enabled.

basefiles/debian/copyright.in

@@ -0,0 +1,28 @@
+This is the Debian #OSNAME# prepackaged version of the Debian Base System
+Miscellaneous files. These files were written by Ian Murdock
+<imurdock@debian.org> and Bruce Perens <bruce@pixar.com>.
+
+This package was first put together by Bruce Perens <Bruce@Pixar.com>,
+from his own sources.
+
+The GNU Public Licenses in /usr/share/common-licenses were taken from
+ftp.gnu.org and are copyrighted by the Free Software Foundation, Inc.
+
+The Artistic License in /usr/share/common-licenses is the one coming
+from Perl and its SPDX name is "Artistic License 1.0 (Perl)".
+
+
+Copyright (C) 1995-2011 Software in the Public Interest.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+On Debian #OSNAME# systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.

basefiles/debian/current-md5sums-obsolete

@@ -0,0 +1,3 @@
+#!/bin/sh
+sed -e "s&#OSNAME#&GNU/Linux&" etc/motd | awk 'NR > 2' | md5sum
+sed -e "s&#OSNAME#&GNU/Hurd&"  etc/motd | awk 'NR > 2' | md5sum

basefiles/debian/lsb-release-udeb.install

@@ -0,0 +1 @@
+etc/lsb-release

basefiles/debian/motd-news

@@ -0,0 +1,19 @@
+# Enable/disable the dynamic MOTD news service
+# This is a useful way to provide dynamic, informative
+# information pertinent to the users and administrators
+# of the local system
+ENABLED=1
+
+# Configure the source of dynamic MOTD news
+# White space separated list of 0 to many news services
+# For security reasons, these must be https
+# and have a valid certificate
+# Canonical runs a service at motd.ubuntu.com, and you
+# can easily run one too
+URLS="https://motd.ubuntu.com"
+
+# Specify the time in seconds, you're willing to wait for
+# dynamic MOTD news
+# Note that news messages are fetched in the background by
+# a systemd timer, so this should never block boot or login
+WAIT=5

basefiles/debian/motd-news-config.install

@@ -0,0 +1 @@
+debian/motd-news etc/default

basefiles/debian/motd-news-config.lintian-overrides

@@ -0,0 +1,5 @@
+#
+# enabling/disabling in the .service file would not allow the
+# "other-package activates service" mechanism that motd-news uses
+#
+motd-news-config: init.d-script-should-always-start-service

basefiles/debian/motd-news-config.postinst

@@ -0,0 +1,55 @@
+#!/bin/sh
+# postinst script for motd-news-config
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see https://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+      # only run on new installs, $2 will be empty then
+      if [ -z "$2" ]; then
+          # /e/d/motd-news was moved from pkg:base-files to this package.
+          # base-files runs rm_conffile which, if it was modified, leaves
+          # /e/d/motd-news.dpkg-bak around. We want to preserve that *changed*
+          # config file in this migration, and this is something that
+          # rm_conffile is not handling.  In that case, let's put the backup
+          # file back in place
+          if [ -e /etc/default/motd-news.dpkg-bak ]; then
+              mv /etc/default/motd-news.dpkg-bak /etc/default/motd-news
+          fi
+          if [ -e /etc/default/motd-news.wasremoved ] && [ -e /etc/default/motd-news ]; then
+              sed -i -e 's/^ENABLED=1/# Changed by motd-news-config.postinst:\n# config file was manually removed - disable the service\nENABLED=0/' /etc/default/motd-news
+          fi
+      fi
+      rm -f /etc/default/motd-news.wasremoved
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

basefiles/debian/motd-news.service

@@ -0,0 +1,8 @@
+[Unit]
+Description=Message of the Day
+After=network-online.target
+Documentation=man:update-motd(8)
+
+[Service]
+Type=oneshot
+ExecStart=/etc/update-motd.d/50-motd-news --force

basefiles/debian/motd-news.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Message of the Day
+
+[Timer]
+OnCalendar=00,12:00:00
+RandomizedDelaySec=12h
+Persistent=true
+OnStartupSec=1min
+
+[Install]
+WantedBy=timers.target

basefiles/debian/postinst.in

@@ -13,10 +13,6 @@ install_local_dir() {
   if [ ! -d "$DPKG_ROOT$1" ]; then
     mkdir -p "$DPKG_ROOT$1"
   fi
-  if [ -f "$DPKG_ROOT/etc/staff-group-for-usr-local" ]; then
-    chown root:staff "$DPKG_ROOT$1" 2>/dev/null || true
-    chmod 2775 "$DPKG_ROOT$1" 2> /dev/null || true
-  fi
 }
 
 install_from_default() {
@@ -62,7 +58,7 @@ if [ "$1" = "configure" ] && [ "$2" = "" ]; then
   install_from_default dot.profile   /root/.profile
   install_from_default dot.bashrc    /root/.bashrc
   install_from_default profile       /etc/profile
-  install_from_default motd          /etc/motd
+  install_from_default networks      /etc/networks
   install_directory mnt       755 root
   install_directory srv       755 root
   install_directory opt       755 root
@@ -83,7 +79,6 @@ if [ "$1" = "configure" ] && [ "$2" = "" ]; then
   install_local_dir /usr/local/bin
   install_local_dir /usr/local/games
   install_local_dir /usr/local/lib
-  install_local_dir /usr/local/libexec
   install_local_dir /usr/local/include
   install_local_dir /usr/local/sbin
   install_local_dir /usr/local/src
@@ -101,6 +96,14 @@ if [ -d "$DPKG_ROOT/usr/share/info" ] && [ ! -f "$DPKG_ROOT/usr/info/dir" ] && [
 fi
 
 if [ "$1" = "configure" ] && [ "$2" != "" ]; then
+  # If we're upgrading base-files, remove the upgrade-available flag
+  # maintained by update-manager, and rerun the release-upgrade check
+  # immediately (in the background) to update the flag.
+  rm -f $DPKG_ROOT/var/lib/update-notifier/release-upgrade-available
+  if [ -x $DPKG_ROOT/usr/lib/update-manager/check-new-release ]; then
+    $DPKG_ROOT/usr/lib/update-manager/check-new-release -q > $DPKG_ROOT/var/lib/update-notifier/release-upgrade-available  &
+  fi
+
   update_to_current_default profile       /etc/profile
   update_to_current_default dot.profile   /root/.profile
   if dpkg --compare-versions "$2" lt-nl "7.7"; then
@@ -108,26 +111,21 @@ if [ "$1" = "configure" ] && [ "$2" != "" ]; then
   fi
 fi
 
-rtlddir="#USR_MERGE_RTLDLIB#"
-if [ "$1" = "configure" ] && [ -n "$rtlddir" ]; then
-  # Remove temporary DEP17 M4 diversion added by glibc.
-  dpkg-divert --quiet --package base-files --remove --no-rename --divert "/.$rtlddir.usr-is-merged" "/$rtlddir"
-fi
-
-if [ "$1" = "configure" ] || [ "$1" = "triggered" ]; then
-  for d in #USR_MERGE_MULTILIB#; do
-    if [ -d "$DPKG_ROOT/usr/$d" ]; then
-      if [ -L "$DPKG_ROOT/$d" ]; then
-        :
-      elif [ -d "$DPKG_ROOT/$d" ]; then
-        echo "Warning: /$d is not a symlink, but should be." 1>&2
-      else
-        ln -s "usr/$d" "$DPKG_ROOT/$d"
+# special case of having /etc/default/motd-news removed by hand
+# signal the motd-news-config package that this happened, so that
+# it does not put back the file with default contents which would
+# re-enable motd-news
+motd_news_config="$DPKG_ROOT/etc/default/motd-news"
+# only in upgrades, never fresh installs like in debootstrap
+if [ "$2" != "" ] && \
+   [ ! -e ${motd_news_config} ] && \
+   [ ! -e ${motd_news_config}.dpkg-remove ] && \
+   [ ! -e ${motd_news_config}.dpkg-backup ]; then
+      # The .wasremoved file only matters if ubuntu-server is installed,
+      # because that's what will pull in motd-news-config
+      if dpkg -l ubuntu-server 2>/dev/null | grep -q ^i; then
+        touch ${motd_news_config}.wasremoved
       fi
-    elif [ -L "$DPKG_ROOT/$d" ]; then
-      rm "$DPKG_ROOT/$d"
-    fi
-  done
 fi
 
 #DEBHELPER#

basefiles/debian/rules

@@ -1,7 +1,5 @@
 #!/usr/bin/make -f
 
-include /usr/share/dpkg/architecture.mk
-
 OSNAME = "GNU/`uname | sed -e 's/GNU\///'`"
 ifeq ($(DEB_HOST_GNU_SYSTEM),linux)
   OSNAME=GNU/Linux
@@ -10,42 +8,33 @@ ifeq ($(DEB_HOST_GNU_SYSTEM),gnu)
   OSNAME=GNU/Hurd
 endif
 
-VENDORFILE = pika
+VENDORFILE = ubuntu
 DESTDIR = debian/base-files
 
-ifneq (,$(filter $(DEB_HOST_ARCH),amd64 loong64 mips64el ppc64 ppc64el sparc64))
-  USR_MERGE_RTLDLIB = lib64
-else ifneq (,$(filter $(DEB_HOST_ARCH),x32))
-  USR_MERGE_RTLDLIB = libx32
-endif
-USR_MERGE = bin lib sbin $(USR_MERGE_RTLDLIB)
-USR_MERGE_MULTILIB = $(filter-out $(USR_MERGE),lib32 lib64 libo32 libx32)
-
 %:
 	dh $@
 
-execute_after_dh_clean:
-	sh debian/timestamps
+locale-check:
+	$(CC) $(CFLAGS) $(LDFLAGS) -o locale-check locale-check.c
 
-override_dh_auto_build:
-	set -e; { \
-	  echo "# Triggers for creating multilib aliasing symlinks on demand"; \
-	  for d in $(USR_MERGE_MULTILIB); do \
-	    echo "interest-noawait /usr/$$d"; \
-	  done; \
-	} > debian/triggers
-
-execute_after_dh_installdirs:
-	dh_installdirs $(foreach d,$(USR_MERGE),usr/$(d))
+override_dh_auto_build: locale-check
+	sh debian/check-md5sum-etc profile
+	sed -e "s&#OSNAME#&$(OSNAME)&g" debian/copyright.in > debian/copyright
+	sed -e "s/#VENDORFILE#/$(VENDORFILE)/g" debian/postinst.in > debian/postinst
 
 override_dh_auto_install:
 	install -p -m 644 etc/*      $(DESTDIR)/etc
 	install -p -m 755 motd/*     $(DESTDIR)/etc/update-motd.d
+	install -p -m 644 debian/motd-news.service $(DESTDIR)/lib/systemd/system/
+	install -p -m 644 debian/motd-news.timer $(DESTDIR)/lib/systemd/system/
 	install -p -m 644 licenses/* $(DESTDIR)/usr/share/common-licenses
 	install -p -m 644 origins/*  $(DESTDIR)/etc/dpkg/origins
 	install -p -m 644 share/*    $(DESTDIR)/usr/share/base-files
 	mkdir $(DESTDIR)/usr/share/pixmaps
 	install -p -m 644 logos/*    $(DESTDIR)/usr/share/pixmaps
+	install -p -m 644 share/*    $(DESTDIR)/usr/share/
+	install -p -m 644 profile.d/* $(DESTDIR)/etc/profile.d
+	install -p -m 755 locale-check $(DESTDIR)/usr/bin
 ifeq ($(DEB_HOST_GNU_SYSTEM),gnu)
 	rmdir $(DESTDIR)/sys
 endif
@@ -57,15 +46,12 @@ endif
 	mv $(DESTDIR)/etc/os-release $(DESTDIR)/usr/lib/os-release
 	ln -s ../usr/lib/os-release $(DESTDIR)/etc/os-release
 
-override_dh_installchangelogs:
-	dh_installchangelogs --no-trim
+override_dh_installsystemd:
+	dh_installsystemd -pbase-files motd-news.timer
+	dh_installsystemd -pbase-files motd-news.service
 
 override_dh_link:
 	dh_link -X os-release
-	# We want these links to be relative, so we cannot use dh_link.
-	set -e; for d in $(USR_MERGE); do \
-	  ln -s usr/$$d debian/base-files/$$d; \
-	done
 
 override_dh_compress:
 	dh_compress -X README
@@ -77,9 +63,3 @@ override_dh_fixperms:
 	cd debian/base-files && chmod 1777 `cat ../1777-dirs`
 	cd debian/base-files && chmod 2775 `cat ../2775-dirs`
 	cd debian/base-files && chmod 700 root
-
-override_dh_installdeb:
-	dh_installdeb \
-	  '-DVENDORFILE=$(VENDORFILE)' \
-	  '-DUSR_MERGE_MULTILIB=$(USR_MERGE_MULTILIB)' \
-	  '-DUSR_MERGE_RTLDLIB=$(USR_MERGE_RTLDLIB)'

basefiles/debian/source/format

@@ -0,0 +1 @@
+3.0 (native)

basefiles/etc/debian_version

@@ -0,0 +1 @@
+bookworm/sid

basefiles/etc/host.conf

@@ -0,0 +1,3 @@
+# The "order" line is only used by old versions of the C library.
+order hosts,bind
+multi on

basefiles/etc/issue

@@ -0,0 +1,2 @@
+PikaOS 22.10 \n \l
+

basefiles/etc/issue.net

@@ -0,0 +1 @@
+PikaOS 22.10

basefiles/etc/legal

@@ -0,0 +1 @@
+ILLEGAL!

basefiles/etc/lsb-release

@@ -0,0 +1,4 @@
+DISTRIB_ID=PikaOS
+DISTRIB_RELEASE=22.10
+DISTRIB_CODENAME=kinetic
+DISTRIB_DESCRIPTION="PikaOS 22.10"

basefiles/etc/os-release

@@ -0,0 +1,10 @@
+PRETTY_NAME="PikaOS 22.10"
+NAME="PikaOS"
+VERSION_ID="22.10"
+VERSION="22.10 (Kinetic Kudu)"
+VERSION_CODENAME=kinetic
+ID=pika
+ID_LIKE="ubuntu debian"
+VERSION_CODENAME=kinetic
+UBUNTU_CODENAME=kinetic
+LOGO=pika-logo

basefiles/licenses/GFDL-1.2

@@ -355,7 +355,7 @@ The Free Software Foundation may publish new, revised versions
 of the GNU Free Documentation License from time to time.  Such new
 versions will be similar in spirit to the present version, but may
 differ in detail to address new problems or concerns.  See
-https://www.gnu.org/licenses/.
+http://www.gnu.org/copyleft/.
 
 Each version of the License is given a distinguishing version number.
 If the Document specifies that a particular numbered version of this

basefiles/licenses/GFDL-1.3

@@ -4,7 +4,7 @@
 
 
  Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
-     <https://fsf.org/>
+     <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -377,7 +377,7 @@ The Free Software Foundation may publish new, revised versions of the
 GNU Free Documentation License from time to time.  Such new versions
 will be similar in spirit to the present version, but may differ in
 detail to address new problems or concerns.  See
-https://www.gnu.org/licenses/.
+http://www.gnu.org/copyleft/.
 
 Each version of the License is given a distinguishing version number.
 If the Document specifies that a particular numbered version of this
@@ -401,19 +401,19 @@ public wiki that anybody can edit is an example of such a server.  A
 "Massive Multiauthor Collaboration" (or "MMC") contained in the site
 means any set of copyrightable works thus published on the MMC site.
 
-"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
-license published by Creative Commons Corporation, a not-for-profit
-corporation with a principal place of business in San Francisco,
-California, as well as future copyleft versions of that license
+"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 
+license published by Creative Commons Corporation, a not-for-profit 
+corporation with a principal place of business in San Francisco, 
+California, as well as future copyleft versions of that license 
 published by that same organization.
 
-"Incorporate" means to publish or republish a Document, in whole or in
+"Incorporate" means to publish or republish a Document, in whole or in 
 part, as part of another Document.
 
-An MMC is "eligible for relicensing" if it is licensed under this
-License, and if all works that were first published under this License
-somewhere other than this MMC, and subsequently incorporated in whole or
-in part into the MMC, (1) had no cover texts or invariant sections, and
+An MMC is "eligible for relicensing" if it is licensed under this 
+License, and if all works that were first published under this License 
+somewhere other than this MMC, and subsequently incorporated in whole or 
+in part into the MMC, (1) had no cover texts or invariant sections, and 
 (2) were thus incorporated prior to November 1, 2008.
 
 The operator of an MMC Site may republish an MMC contained in the site

basefiles/licenses/GPL-3

@@ -1,7 +1,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -645,7 +645,7 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -664,11 +664,11 @@ might be different; for a GUI interface, you would use an "about box".
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
+<http://www.gnu.org/licenses/>.
 
   The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.

basefiles/licenses/LGPL-2

@@ -133,7 +133,7 @@ such a program is covered only if its contents constitute a work based
 on the Library (independent of the use of the Library in a tool for
 writing it).  Whether that is true depends on what the Library does
 and what the program that uses the Library does.
-
+  
   1. You may copy and distribute verbatim copies of the Library's
 complete source code as you receive it, in any medium, provided that
 you conspicuously and appropriately publish on each copy an

basefiles/licenses/LGPL-3

@@ -1,7 +1,7 @@
                    GNU LESSER GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 

basefiles/locale-check.c

@@ -0,0 +1,80 @@
+#include <locale.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+char *help = "locale-check DEFAULT_LOCALE\n"
+	"\n"
+	"Check that the various locale-related environment variables contain\n"
+	"values that can be set. Output shell that can be passed to eval to\n"
+	"set any invalid environment variables to DEFAULT_LOCALE\n";
+
+static void usage(void) {
+	fprintf(stderr, "%s", help);
+	exit(1);
+}
+
+static void check(int category, char* varname, char* defvalue) {
+	if (getenv(varname) != NULL) {
+		if (setlocale(category, "") == NULL) {
+			printf("%s=%s\n", varname, defvalue);
+		}
+	}
+}
+
+#define SINGLEQUOTE '\''
+#define BACKSLASH   '\\'
+
+/* Quote 'val' for shell */
+static char *quote(char* val) {
+	/* This implementation single quotes val and replaces single quotes
+	   with SINGLEQUOTE BACKSLASH SINGLEQUOTE SINGLEQUOTE. The worst
+	   case is that val is entirely single quotes, in which case each
+	   character of the input becomes 4 bytes. Then 3 bytes for
+	   surrounding quotes and terminating NUL. */
+	char *ret = malloc(strlen(val)*4+3);
+	char *source = val;
+	char *dest = ret;
+
+	*dest++ = SINGLEQUOTE;
+	while (*source) {
+		if (*source == SINGLEQUOTE) {
+			*dest++ = SINGLEQUOTE;
+			*dest++ = BACKSLASH;
+			*dest++ = SINGLEQUOTE;
+		}
+		*dest++ = *source++;
+	}
+	*dest++ = SINGLEQUOTE;
+	*dest++ = 0;
+	return ret;
+}
+
+#define CHECK(cat, def) check(cat, #cat, def);
+
+int main(int argc, char** argv) {
+	char *defval;
+	if (argc != 2) {
+		usage();
+	}
+	defval = quote(argv[1]);
+	/* setlocale will never consult LANG if LC_ALL is set */
+	if (getenv("LC_ALL") == NULL) {
+		check(LC_ALL, "LANG", defval);
+	} else {
+		CHECK(LC_ALL, defval);
+	}
+	CHECK(LC_ADDRESS, defval);
+	CHECK(LC_COLLATE, defval);
+	CHECK(LC_CTYPE, defval);
+	CHECK(LC_IDENTIFICATION, defval);
+	CHECK(LC_MEASUREMENT, defval);
+	CHECK(LC_MESSAGES, defval);
+	CHECK(LC_MONETARY, defval);
+	CHECK(LC_NAME, defval);
+	CHECK(LC_NUMERIC, defval);
+	CHECK(LC_PAPER, defval);
+	CHECK(LC_TELEPHONE, defval);
+	CHECK(LC_TIME, defval);
+	return 0;
+}

basefiles/logos/pika-logo.svg

@@ -0,0 +1,59 @@
+<svg version="1.2" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 720 720" width="64" height="64">
+	<title>pika-logo-svg</title>
+	<defs>
+		<clipPath clipPathUnits="userSpaceOnUse" id="cp1">
+			<path d="m0 0h720v720h-720z"/>
+		</clipPath>
+		<filter x="-50%" y="-50%" width="200%" height="200%" id="f1"> <feGaussianBlur stdDeviation="2.1"/> </filter>
+	</defs>
+	<style>
+		.s0 { fill: #929291 } 
+		.s1 { fill: #b8b0ae } 
+		.s2 { fill: #ffc508 } 
+		.s3 { fill: #b19c9c;stroke: #b19c9c;stroke-width: 2.4 } 
+		.s4 { fill: #000000 } 
+		.s5 { fill: #ffffff } 
+		.s6 { filter: url(#f1);fill: #ec520a } 
+		.s7 { filter: url(#f1);fill: #ffffff } 
+		.s8 { fill: none;stroke: #000000;stroke-linecap: round;stroke-linejoin: round;stroke-width: 8.5 } 
+	</style>
+	<g id="Clip-Path: g151" clip-path="url(#cp1)">
+		<g id="g151">
+			<g id="g11">
+				<path id="path7" class="s0" d="m321.5 704.2c0 0-115.8-34.4-141.4-52.1-34.5-23.9-62.8-50.8-81.6-74.1 43.4-135.4 64.9-234.1 96.3-300.7 53.8-222.1 234.2-231.9 323 16.9 7.4 16.1 31.1 33.4 48.3 70 7 15 5.4 31.4 10.8 54.3 5 30.8 4.2 86.5 31 186.6-23.1 21.3-57.2 48.6-93.7 64.5-51.9 22.8-102.9 33.4-102.9 33.4"/>
+			</g>
+			<g id="layer1">
+			</g>
+			<g id="g26191">
+			</g>
+			<g id="g22">
+				<path id="path20" class="s1" d="m192.1 281.7c-28.2 85.9-60.7 199-88.7 304.7-32.3-45.8-41.2-57.1-55.9-86.2 30.8-36.7 64.5-67.6 85.6-82.8 15-10.7 32.5-60.8 38.7-81.8 6.3-20.7 10.5-43.7 20.3-53.9z"/>
+			</g>
+			<g id="g33">
+				<path id="path31" class="s1" d="m518.7 263.3c5.2 24 21.3 81.9 40.6 96.9 32 24.8 85 77.1 125.8 133.5-33.4 53.4 2.3 32.5-98.8 131.1-21.7-139.5-52.9-305-83.4-425.2 12.3 13.3 10.6 39.9 15.8 63.7z"/>
+			</g>
+			<g id="g55">
+				<path id="path35" class="s2" d="m153.8 363.5c26.9-58.6-2.1-64 43.8-121.2 21.7-27 16.1-92.8 44.2-133.5 28.1-40.7 56.8-69.2 119.3-71.5 62.5-2.3 121.3 51.8 146.2 99.7 24.9 47.9 23.4 83.7 31.4 121.1 7.9 37.3 32.5 98.6 33.7 109.4-15.3 4.5-19.3 4.1-27.8 8.8-10.9 6.1-19.1 16-28.3 24.3-18.8 17.2-30.5 46-54.9 53.2-17.9 5.4-36.7-6.8-55-10.5-20.1-4-40.3-17.5-60.2-12.6-12.2 3-29.2 23.9-29.2 23.9-12.3 10.2-20.5-26-35.1-32.6-14.5-6.4-33.9 3.9-47.4-4.4-17.7-10.9-15.2-42.5-33.3-52.8-13.7-7.8-26.5 15.8-47.4-1.3z"/>
+			</g>
+			<g id="g91">
+				<path id="path89" class="s3" d="m364.1 201c27.9-0.8 60 19.3 58.2 62.3-19.5 25.3-37.5 55.2-45.6 89.4-8.1 34.3-19.6 18.6-24.9 16.4-5.2-2.3-23.2-62-26.7-74.6-3.5-12.7-16.2-36.7-9.9-53.9 7.2-19.7 27.9-39.1 48.9-39.6z"/>
+			</g>
+			<g id="g105">
+				<path id="path97" class="s4" d="m474.4 199.1c0.2-12.5 4.7-22.5 10-22.4 5.3 0 9.5 10.2 9.3 22.7-0.2 12.5-4.7 22.6-10 22.5-5.3-0.1-9.5-10.3-9.3-22.8z"/>
+				<path id="path99" class="s5" d="m479.3 199.9c-0.3-4.2 1.7-7.9 4.3-8.2 2.7-0.3 5 2.8 5.2 7 0.3 4.2-1.7 7.8-4.3 8.1-2.6 0.3-5-2.8-5.2-6.9z"/>
+				<path id="path101" class="s4" d="m255.2 191c0.6-12.8 4.8-23.1 9.3-22.9 4.6 0.2 7.8 10.8 7.2 23.7-0.6 12.9-4.8 23.2-9.4 23-4.5-0.3-7.7-10.9-7.1-23.8z"/>
+				<path id="path103" class="s5" d="m259.3 191.5c0.1-4.3 2.1-7.8 4.4-7.9 2.3 0 4 3.5 3.9 7.8-0.2 4.3-2.1 7.8-4.4 7.8-2.3 0-4-3.4-3.9-7.7z"/>
+			</g>
+			<g id="g118">
+				<path id="ellipse62" class="s6" d="m482.5 337.8c-22.1 0-39.9-18.9-39.9-42.3 0-23.4 17.8-42.3 39.9-42.3 22.1 0 39.9 18.9 39.9 42.3 0 23.4-17.8 42.3-39.9 42.3z"/>
+				<path id="ellipse116" class="s6" d="m257.6 328.2c-23.4 0-42.3-18.3-42.3-40.9 0-22.6 18.9-40.9 42.3-40.9 23.4 0 42.3 18.3 42.3 40.9 0 22.6-18.9 40.9-42.3 40.9z"/>
+			</g>
+			<g id="g139">
+				<path id="path137" class="s7" d="m540.1 560.5c0 6.1-1.1 12-2.8 17.6-0.9 3.2-3 7.9-3 7.9-16.3 35.8-61 59-61 59 0 0-44.7-23.2-61-59-1.4-2.8-3-7.9-3-7.9-1.8-5.6-2.8-11.5-2.8-17.6 0-22.8 17.3-41.3 38.6-41.3 11.1 0 21.2 4.5 28.2 12.6 7-8.1 17.1-12.6 28.3-12.6 21.2 0 38.5 18.5 38.5 41.3z"/>
+			</g>
+			<g id="layer2">
+				<path id="path901" class="s8" d="m363.8 705.1c-191.1 0-345.5-154.4-345.5-345.5 0-191.1 154.4-345.6 345.5-345.6 191.1 0 345.6 154.5 345.6 345.6 0 191.1-154.5 345.5-345.6 345.5z"/>
+			</g>
+		</g>
+	</g>
+</svg>

basefiles/logos/ubuntu-logo-text-dark.png

@@ -0,0 +1 @@
+pika-logo-text-dark.svg

basefiles/logos/ubuntu-logo-text-dark.svg

@@ -0,0 +1 @@
+pika-logo-text-dark.svg

basefiles/logos/ubuntu-logo-text.png

@@ -0,0 +1 @@
+pika-logo-text.svg

basefiles/logos/ubuntu-logo-text.svg

@@ -0,0 +1 @@
+pika-logo-text.svg

basefiles/logos/ubuntu-logo.png

@@ -0,0 +1 @@
+pika-logo.svg

basefiles/logos/ubuntu-logo.svg

@@ -0,0 +1 @@
+pika-logo.svg

basefiles/motd/00-header

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+[ -r /etc/lsb-release ] && . /etc/lsb-release
+
+if [ -z "$DISTRIB_DESCRIPTION" ] && [ -x /usr/bin/lsb_release ]; then
+	# Fall back to using the very slow lsb_release utility
+	DISTRIB_DESCRIPTION=$(lsb_release -s -d)
+fi
+
+printf "Welcome to %s (%s %s %s)\n" "$DISTRIB_DESCRIPTION" "$(uname -o)" "$(uname -r)" "$(uname -m)"

basefiles/motd/10-help-text

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+printf "911 what's your emergency?\n"

basefiles/motd/50-motd-news

@@ -0,0 +1 @@
+#!/bin/sh

basefiles/origins/debian

@@ -0,0 +1,3 @@
+Vendor: Debian
+Vendor-URL: https://www.debian.org/
+Bugs: debbugs://bugs.debian.org

basefiles/origins/pika

@@ -0,0 +1,2 @@
+Vendor: PikaOS
+Parent: Ubuntu

basefiles/origins/ubuntu

@@ -0,0 +1,4 @@
+Vendor: Ubuntu
+Vendor-URL: http://www.ubuntu.com/
+Bugs: https://bugs.launchpad.net/ubuntu/+filebug
+Parent: Debian