Port to PikaOS 4

.github/build-canary-i386

@@ -0,0 +1 @@
+1

.github/build-canary-v3

@@ -0,0 +1 @@
+1

.github/build-nest-i386

@@ -0,0 +1 @@
+1

.github/build-nest-v3

@@ -0,0 +1 @@
+1

.github/release-canary-i386

@@ -0,0 +1 @@
+1

.github/release-canary-v3

@@ -0,0 +1 @@
+1

.github/release-nest-i386

@@ -0,0 +1 @@
+1

.github/release-nest-v3

@@ -0,0 +1 @@
+1

.github/workflows/build-canaryi386.yml

@@ -0,0 +1,37 @@
+name: PikaOS Package Build Only (Canary) (i386)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/build-canary-i386'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:canaryi386
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh

.github/workflows/build-canaryv3.yml

@@ -0,0 +1,37 @@
+name: PikaOS Package Build Only (Canary) (amd64-v3)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/build-canary-v3'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:canaryv3
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh

.github/workflows/build-nesti386.yml

@@ -0,0 +1,37 @@
+name: PikaOS Package Build Only (i386)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/build-nest-i386'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:nesti386
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh

.github/workflows/build-nestv3.yml

@@ -0,0 +1,37 @@
+name: PikaOS Package Build Only (amd64-v3)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/build-nest-v3'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:nestv3
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh

.github/workflows/release-canaryi386.yml

@@ -0,0 +1,40 @@
+name: PikaOS Package Build & Release (Canary) (i386)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/release-canary-i386'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:canaryi386
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh
+
+    - name: Release Package
+      run: ./release.sh

.github/workflows/release-canaryv3.yml

@@ -0,0 +1,40 @@
+name: PikaOS Package Build & Release (Canary) (amd64-v3)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/release-canary-v3'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:canaryv3
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh
+
+    - name: Release Package
+      run: ./release.sh

.github/workflows/release-nesti386.yml

@@ -0,0 +1,40 @@
+name: PikaOS Package Build & Release (i386)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/release-nest-i386'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:nesti386
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/i386.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh
+
+    - name: Release Package
+      run: ./release.sh

.github/workflows/release-nestv3.yml

@@ -0,0 +1,40 @@
+name: PikaOS Package Build & Release (amd64-v3)
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - '.github/release-nest-v3'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container:
+      image: ghcr.io/pikaos-linux/pikaos-builder:nestv3
+      volumes:
+        - /proc:/proc
+      options: --privileged -it
+
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Install SSH key
+      uses: shimataro/ssh-key-action@v2
+      with:
+        key: ${{ secrets.SSH_KEY }}
+        name: id_rsa
+        known_hosts: ${{ secrets.KNOWN_HOSTS }}
+        if_key_exists: replace
+    
+    - name: Update APT Cache
+      run: apt-get update -y
+
+    - name: Set Build Config
+      run: cp -vf ./pika-build-config/amd64-v3.sh ./pika-build-config.sh
+
+    - name: Build Package
+      run: ./main.sh
+
+    - name: Release Package
+      run: ./release.sh

.github/workflows/release.yml

@@ -1,49 +0,0 @@
-name: PikaOS Package Release
-
-on:
-  workflow_dispatch
-
-jobs:
-  build:
-    runs-on: self-hosted
-    container:
-      image: ghcr.io/pikaos-linux/pika-package-container:latest
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Import GPG key
-      id: import_gpg
-      uses: crazy-max/ghaction-import-gpg@v5
-      with:
-        gpg_private_key: ${{ secrets.GPG_PRIVATE_KEY }}
-        passphrase: ${{ secrets.PASSPHRASE }}
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-
-    - name: Update apt cache
-      run: apt-get update -y
-    
-    - name: Build Package
-      run: ./main.sh
-
-    - name: Release Package
-      run: ./release.sh
-
-    - name: Purge cache
-      uses: strrife/cloudflare-chunked-purge-action@master
-      env:
-        # Zone is required by both authentication methods
-        CLOUDFLARE_ZONE: ${{ secrets.CLOUDFLARE_ZONE }}
-
-        CLOUDFLARE_TOKEN: ${{ secrets.CLOUDFLARE_TOKEN }}
-        PURGE_URLS: ${{ vars.PURGE_URLS }}

.github/workflows/release_i386.yml

@@ -1,49 +0,0 @@
-name: PikaOS Package Release (i386)
-
-on:
-  workflow_dispatch
-
-jobs:
-  build:
-    runs-on: self-hosted
-    container:
-      image: ghcr.io/pikaos-linux/pika-i386-package-container:latest
-      volumes:
-        - /proc:/proc
-      options: --privileged -it
-
-    steps:
-    - uses: actions/checkout@v3
-
-    - name: Import GPG key
-      id: import_gpg
-      uses: crazy-max/ghaction-import-gpg@v5
-      with:
-        gpg_private_key: ${{ secrets.GPG_PRIVATE_KEY }}
-        passphrase: ${{ secrets.PASSPHRASE }}
-
-    - name: Install SSH key
-      uses: shimataro/ssh-key-action@v2
-      with:
-        key: ${{ secrets.SSH_KEY }}
-        name: id_rsa
-        known_hosts: ${{ secrets.KNOWN_HOSTS }}
-        if_key_exists: replace
-
-    - name: Update apt cache
-      run: apt-get update -y
-    
-    - name: Build Package
-      run: ./main32.sh
-
-    - name: Release Package
-      run: ./release.sh
-
-    - name: Purge cache
-      uses: strrife/cloudflare-chunked-purge-action@master
-      env:
-        # Zone is required by both authentication methods
-        CLOUDFLARE_ZONE: ${{ secrets.CLOUDFLARE_ZONE }}
-
-        CLOUDFLARE_TOKEN: ${{ secrets.CLOUDFLARE_TOKEN }}
-        PURGE_URLS: ${{ vars.PURGE_URLS }}

LICENSE.md

@@ -0,0 +1,24 @@
+MIT License (With DPKG packaging compatibility)
+
+Copyright (c) 2024 PikaOS
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+Notes:
+The files covered by this license are any files and directories in the root of this repository (including but not limited to: `main.sh`, `release.sh`, and `.github`), with the exception of the `debian` directory and its contents if `debian/copyright` exists, and declares any files or directories as a different LICENSE/COPYRIGHT.

debian/README.source

@@ -16,9 +16,9 @@ debian/patches and add the name of the patch to debian/patches/series.
 
 
 The X Strike Force team maintains X packages in git repositories on
-git.debian.org in the pkg-xorg subdirectory. Most upstream packages
+salsa.debian.org in the xorg-team subdirectory. Most upstream packages
 are actually maintained in git repositories as well, so they often
-just need to be pulled into git.debian.org in a "upstream-*" branch.
+just need to be pulled into salsa.debian.org in a "upstream-*" branch.
 
 The .orig.tar.gz is upstream's mesa tarball.
 

debian/control

@@ -1,27 +1,27 @@
 Source: mesa
 Section: graphics
 Priority: optional
-Maintainer: First Mate Rummey <fmrummey@gmail.com>
-XSBC-Original-Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
-Uploaders: Andreas Boll <aboll@debian.org>
+Maintainer: Ki'Sak <kisak.ppa@gmail.com>
+XSBC-Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: Ki'Sak <kisak.ppa@gmail.com>
 Standards-Version: 4.1.4
 Build-Depends:
- debhelper-compat (= 12),
- directx-headers-dev (>= 1.602.0) [linux-amd64 linux-arm64],
- glslang-tools [amd64 arm64 armel armhf i386 mips64el mipsel powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
- meson (>= 0.45),
+ debhelper-compat (= 13),
+ directx-headers-dev (>= 1.610.0) [linux-amd64 linux-arm64],
+ glslang-tools [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
+ meson (>= 1.3.1),
  quilt (>= 0.63-8.2~),
  pkg-config,
- libdrm-dev (>= 2.4.107-4),
+ libdrm-dev (>= 2.4.119),
  libx11-dev,
  libxxf86vm-dev,
  libexpat1-dev,
  libsensors-dev [!hurd-any],
  libxfixes-dev,
  libxext-dev,
- libva-dev (>= 1.6.0) [linux-any kfreebsd-any] <!pkg.mesa.nolibva>,
- libvdpau-dev (>= 1.1.1) [linux-any kfreebsd-any],
- libvulkan-dev [amd64 arm64 armel armhf i386 mips64el mipsel powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
+ libva-dev (>= 1.6.0) [linux-any] <!pkg.mesa.nolibva>,
+ libvdpau-dev (>= 1.1.1) [linux-any],
+ libvulkan-dev [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
  x11proto-dev,
  linux-libc-dev (>= 2.6.31) [linux-any],
  libx11-xcb-dev,
@@ -39,27 +39,26 @@ Build-Depends:
  python3,
  python3-mako,
  python3-ply,
+ python3-pycparser [arm64 armhf],
  python3-setuptools,
  flex,
- spirv-tools,
- rustfmt,
  bison,
- libelf-dev [amd64 arm64 armel armhf i386 mips64el mipsel powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
+ libelf-dev [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
  libwayland-dev (>= 1.15.0) [linux-any],
  libwayland-egl-backend-dev (>= 1.15.0) [linux-any],
- llvm-17-dev [amd64 arm64 armel armhf i386 mips64el mipsel powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
- libclang-17-dev [amd64 arm64 armel armhf i386 mips64el mipsel powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
- libclang-cpp17-dev [amd64 arm64 armel armhf i386 mips64el mipsel powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
- libclc-17-dev [amd64 arm64 armel armhf i386 mips64el mipsel powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
+ llvm-17-dev [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
+ libclang-17-dev [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
+ libclang-cpp17-dev [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
+ libclc-17-dev [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
  wayland-protocols (>= 1.24),
  zlib1g-dev,
  libglvnd-core-dev (>= 1.3.2),
- valgrind [amd64 arm64 armhf i386 mips64el mipsel powerpc ppc64 ppc64el s390x],
- rustc [amd64 arm64 armel armhf mips64el mipsel ppc64el s390x],
- bindgen [amd64 arm64 armel armhf mips64el mipsel ppc64el s390x],
- llvm-spirv-17 [amd64 arm64 armel armhf mips64el mipsel ppc64el s390x],
- libclc-17 [amd64 arm64 armel armhf mips64el mipsel ppc64el s390x],
- libllvmspirvlib-17-dev,
+ valgrind [amd64 arm64 armhf i386 mips64el powerpc ppc64 ppc64el s390x],
+ rustc [amd64 arm64 armel armhf loong64 powerpc ppc64 ppc64el riscv64 s390x x32],
+ bindgen (>= 0.66.1~) [amd64 arm64 armel armhf loong64 powerpc ppc64 ppc64el riscv64 s390x x32],
+ llvm-spirv-17 [amd64 arm64 armel armhf loong64 powerpc ppc64 ppc64el riscv64 s390x x32],
+ libclc-17 [amd64 arm64 armel armhf loong64 powerpc ppc64 ppc64el riscv64 s390x x32],
+ libllvmspirvlib-17-dev [amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32],
 Rules-Requires-Root: no
 Vcs-Git: https://salsa.debian.org/xorg-team/lib/mesa.git
 Vcs-Browser: https://salsa.debian.org/xorg-team/lib/mesa

debian/control.in

@@ -1,28 +1,27 @@
 Source: mesa
 Section: graphics
 Priority: optional
-Maintainer: First Mate Rummey <fmrummey@gmail.com>
-XSBC-Original-Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
-Uploaders: Andreas Boll <aboll@debian.org>
+Maintainer: Ki'Sak <kisak.ppa@gmail.com>
+XSBC-Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: Ki'Sak <kisak.ppa@gmail.com>
 Standards-Version: 4.1.4
 Build-Depends:
- debhelper-compat (= 12),
- directx-headers-dev (>= 1.602.0) [linux-amd64 linux-arm64],
+ debhelper-compat (= 13),
+ directx-headers-dev (>= 1.610.0) [linux-amd64 linux-arm64],
  glslang-tools [@LLVM_ARCHS@],
- meson (>= 0.45),
+ meson (>= 1.3.1),
  quilt (>= 0.63-8.2~),
  pkg-config,
- libdrm-dev (>= 2.4.107-4),
+ libdrm-dev (>= 2.4.119),
  libx11-dev,
  libxxf86vm-dev,
  libexpat1-dev,
  libsensors-dev [!hurd-any],
  libxfixes-dev,
  libxext-dev,
- libva-dev (>= 1.6.0) [linux-any kfreebsd-any] <!pkg.mesa.nolibva>,
- libvdpau-dev (>= 1.1.1) [linux-any kfreebsd-any],
+ libva-dev (>= 1.6.0) [linux-any] <!pkg.mesa.nolibva>,
+ libvdpau-dev (>= 1.1.1) [linux-any],
  libvulkan-dev [@LLVM_ARCHS@],
- vulkan-headers [@LLVM_ARCHS@],
  x11proto-dev,
  linux-libc-dev (>= 2.6.31) [linux-any],
  libx11-xcb-dev,
@@ -40,10 +39,9 @@ Build-Depends:
  python3,
  python3-mako,
  python3-ply,
+ python3-pycparser [arm64 armhf],
  python3-setuptools,
- rustfmt,
  flex,
- spirv-tools,
  bison,
  libelf-dev [@LLVM_ARCHS@],
  libwayland-dev (>= 1.15.0) [linux-any],
@@ -57,10 +55,10 @@ Build-Depends:
  libglvnd-core-dev (>= 1.3.2),
  valgrind [@VALGRIND_ARCHS@],
  rustc [@RUSTICL_ARCHS@],
- bindgen [@RUSTICL_ARCHS@],
+ bindgen (>= 0.66.1~) [@RUSTICL_ARCHS@],
  llvm-spirv-@LLVM_VERSION@ [@RUSTICL_ARCHS@],
  libclc-@LLVM_VERSION@ [@RUSTICL_ARCHS@],
- libllvmspirvlib-@LLVM_VERSION@-dev,
+ libllvmspirvlib-@LLVM_VERSION@-dev [@LLVM_ARCHS@],
 Rules-Requires-Root: no
 Vcs-Git: https://salsa.debian.org/xorg-team/lib/mesa.git
 Vcs-Browser: https://salsa.debian.org/xorg-team/lib/mesa

debian/mesa-common-dev.docs

@@ -1,4 +1,4 @@
 docs/*.rst
 docs/relnotes/*
-docs/_static/specs/*.spec
-docs/_static/specs/OLD/*.spec
+docs/_extra/specs/*.spec
+docs/_extra/specs/OLD/*.spec

debian/rules

@@ -15,7 +15,6 @@ DEB_HOST_ARCH_CPU  ?= $(shell dpkg-architecture -qDEB_HOST_ARCH_CPU)
 # for finding the correct llvm-config when meson doesn't know about it yet
 LLVM_VERSION = 17
 export PATH:=/usr/lib/llvm-$(LLVM_VERSION)/bin/:$(PATH)
-export LIBCLANG_PATH:=/usr/lib/llvm-$(LLVM_VERSION)/lib
 
 export DEB_BUILD_MAINT_OPTIONS=optimize=-lto
 
@@ -43,46 +42,29 @@ confflags_DRI3 = -Ddri3=disabled
 confflags_OSMESA = -Dosmesa=true
 confflags_SSE2 = -Dsse2=true
 
-LLVM_ARCHS     = amd64 arm64 armel armhf i386 mips64el powerpc ppc64 ppc64el riscv64 s390x sparc64 x32
-RUSTICL_ARCHS  = amd64 arm64 armel armhf mips64el powerpc ppc64 ppc64el riscv64 s390x x32
+LLVM_ARCHS     = amd64 arm64 armel armhf i386 loong64 powerpc ppc64 ppc64el riscv64 s390x sparc64 x32
+RUSTICL_ARCHS  = amd64 arm64 armel armhf loong64 powerpc ppc64 ppc64el riscv64 s390x x32
 VALGRIND_ARCHS = amd64 arm64 armhf i386 mips64el powerpc ppc64 ppc64el s390x
-WINE_ARCHS     = amd64 arm64 armel armhf i386 powerpc
+WINE_ARCHS     = amd64 arm64 armel armhf i386
 
 # hurd doesn't do direct rendering
 ifeq ($(DEB_HOST_ARCH_OS), hurd)
   confflags_DIRECT_RENDERING = -Dglx-direct=false
   confflags_GBM = -Dgbm=disabled
 else
-	GALLIUM_DRIVERS += r300 r600
+  # Non-Linux ports lack epoll, so wayland isn't ready yet:
+  # https://gitlab.freedesktop.org/wayland/wayland/-/issues/72
+  # hurd also lacks *_CLOEXEC
+  EGL_PLATFORMS += wayland
 
+  GALLIUM_DRIVERS += nouveau r300 r600 virgl
   confflags_DIRECT_RENDERING = -Dglx-direct=true
+  confflags_DRI3 = -Ddri3=enabled
   confflags_GBM = -Dgbm=enabled
   confflags_GALLIUM += -Dgallium-extra-hud=true
   confflags_GALLIUM += -Dgallium-vdpau=enabled
   confflags_GALLIUM += -Dlmsensors=enabled
 
-  # radv/lavapipe needs LLVM and the Vulkan loader, so only build on the subset of
-  # arches where we have LLVM enabled and where the Vulkan loader is built.
-  ifneq (,$(filter $(DEB_HOST_ARCH), amd64 arm64 armel armhf i386 mips64el powerpc ppc64 ppc64el s390x sparc64))
-  # drop virtio from armel, it doesn't build
-	ifneq (,$(filter $(DEB_HOST_ARCH), armel))
-		VULKAN_DRIVERS += amd swrast
-	else
-		VULKAN_DRIVERS += amd swrast virtio
-	endif
-  endif
-
-  # Only enable amd on riscv64, swrast needs CPU JIT support which doesn't work properly yet
-  ifneq (,$(filter $(DEB_HOST_ARCH), riscv64))
-	VULKAN_DRIVERS += amd
-	confflags_GALLIUM += -Ddraw-use-llvm=false
-  endif
-
-  ifeq ($(DEB_HOST_ARCH_OS), linux)
-	confflags_DRI3 = -Ddri3=enabled
-	# Gallium drivers which require kernel support, not yet ported to non-Linux
-	GALLIUM_DRIVERS += nouveau virgl
-
   # Freedreno requires arm in addition
   ifneq (,$(filter arm arm64,$(DEB_HOST_ARCH_CPU)))
 	GALLIUM_DRIVERS += freedreno
@@ -91,29 +73,24 @@ else
   # etnaviv, tegra, vc4 and v3d kernel support are only available on armhf and arm64
   ifneq (,$(filter $(DEB_HOST_ARCH), armhf arm64))
 	GALLIUM_DRIVERS += etnaviv panfrost svga tegra vc4 v3d
-		VULKAN_DRIVERS += broadcom freedreno panfrost
+	VULKAN_DRIVERS += broadcom freedreno
   endif
 
-	ifneq (,$(filter $(DEB_HOST_ARCH), armhf arm64 riscv64))
+  ifneq (,$(filter $(DEB_HOST_ARCH), armhf arm64 loong64 riscv64))
 	GALLIUM_DRIVERS += lima
   endif
 
+  # Build intel drivers on archs where libdrm-intel is installed
   ifneq (,$(filter $(DEB_HOST_ARCH), amd64 i386 x32))
-		GALLIUM_DRIVERS += svga
+	GALLIUM_DRIVERS += crocus i915 iris svga
+	VULKAN_DRIVERS += intel intel_hasvk
 	# svga needs xa state tracker
 	confflags_GALLIUM += -Dgallium-xa=enabled
-		VULKAN_DRIVERS += intel intel_hasvk
-	endif
-	ifneq (,$(filter $(DEB_HOST_ARCH), amd64))
-		confflags_GALLIUM += -Dintel-clc=disabled
-	else
-		confflags_GALLIUM += -Dintel-clc=disabled
   endif
 
-	# Non-Linux ports lack epoll, so wayland isn't ready yet:
-	# https://gitlab.freedesktop.org/wayland/wayland/-/issues/72
-	# hurd also lacks *_CLOEXEC
-	EGL_PLATFORMS += ,wayland
+  ifneq (,$(filter $(DEB_HOST_ARCH), amd64))
+	confflags_GALLIUM += -Dintel-clc=enabled
+  endif
 
   ifneq (,$(filter $(DEB_HOST_ARCH), $(VALGRIND_ARCHS)))
 	confflags_VALGRIND += -Dvalgrind=enabled
@@ -121,17 +98,11 @@ else
 
   # WSL supports only amd64 and arm64
   DOZEN_INSTALLED=no
-	ifneq (,$(filter amd64 arm64,$(DEB_HOST_ARCH)))
+  ifneq (,$(filter $(DEB_HOST_ARCH), amd64 arm64))
 	GALLIUM_DRIVERS += d3d12
 	VULKAN_DRIVERS += microsoft-experimental
 	DOZEN_INSTALLED=yes
   endif
-  endif
-
-  # Build intel drivers on archs where libdrm-intel is installed
-  ifneq (,$(filter $(DEB_HOST_ARCH),amd64 i386 kfreebsd-amd64 kfreebsd-i386 x32))
-	GALLIUM_DRIVERS += iris crocus i915
-  endif
 
   # LLVM is required for building r300g, radeonsi and llvmpipe drivers.
   # It's also required for building OpenCL support.
@@ -143,7 +114,12 @@ else
 		VULKAN_DRIVERS += amd
 		confflags_GALLIUM += -Ddraw-use-llvm=false
 	else
+	  # drop virtio from armel, it doesn't build
+	  ifneq (,$(filter $(DEB_HOST_ARCH), armel))
 		VULKAN_DRIVERS += amd swrast
+	  else
+		VULKAN_DRIVERS += amd swrast virtio
+	  endif
 	endif
 
 	VULKAN_LAYERS += device-select intel-nullhw overlay
@@ -165,7 +141,7 @@ else
 
   ifeq (,$(filter pkg.mesa.nolibva,$(DEB_BUILD_PROFILES)))
 	confflags_GALLIUM += -Dgallium-va=enabled
-	confflags_GALLIUM += -Dvideo-codecs="vc1dec, h264dec, h264enc, h265dec, h265enc"
+	confflags_GALLIUM += -Dvideo-codecs="all"
   endif
 endif
 
@@ -176,6 +152,8 @@ endif
 empty:=
 space := $(empty) $(empty)
 comma := ,
+EGL_PLATFORMS := $(patsubst %,'%',$(EGL_PLATFORMS))
+EGL_PLATFORMS_LIST := $(subst $(space),$(comma),$(EGL_PLATFORMS))
 GALLIUM_DRIVERS := $(patsubst %,'%',$(GALLIUM_DRIVERS))
 GALLIUM_DRIVERS_LIST := $(subst $(space),$(comma),$(GALLIUM_DRIVERS))
 VULKAN_DRIVERS := $(patsubst %,'%',$(VULKAN_DRIVERS))
@@ -183,13 +161,13 @@ VULKAN_DRIVERS_LIST := $(subst $(space),$(comma),$(VULKAN_DRIVERS))
 VULKAN_LAYERS := $(patsubst %,'%',$(VULKAN_LAYERS))
 VULKAN_LAYERS_LIST := $(subst $(space),$(comma),$(VULKAN_LAYERS))
 
-confflags_EGL = -Dplatforms="$(EGL_PLATFORMS)"
 confflags_GLES = -Dgles1=disabled -Dgles2=enabled
 confflags_GALLIUM += -Dgallium-drivers="[$(GALLIUM_DRIVERS_LIST)]"
 
 confflags += \
 	-Ddri-drivers-path=/usr/lib/$(DEB_HOST_MULTIARCH)/dri \
 	-Ddri-search-path='/usr/lib/$(DEB_HOST_MULTIARCH)/dri:\$$$${ORIGIN}/dri:/usr/lib/dri' \
+	-Dplatforms="[$(EGL_PLATFORMS_LIST)]" \
 	-Dvulkan-drivers="[$(VULKAN_DRIVERS_LIST)]" \
 	-Dvulkan-layers="[$(VULKAN_LAYERS_LIST)]" \
 	-Dglvnd=true \
@@ -201,7 +179,6 @@ confflags += \
 	$(confflags_DIRECT_RENDERING) \
 	$(confflags_GBM) \
 	$(confflags_DRI3) \
-	$(confflags_EGL) \
 	$(confflags_GALLIUM) \
 	$(confflags_GLES) \
 	$(confflags_OSMESA) \
@@ -296,9 +273,6 @@ override_dh_install:
 		install -m 755 debian/local/script  debian/$$p/usr/share/bug/$$p; \
 	done
 
-override_dh_missing:
-	dh_missing --fail-missing
-
 override_dh_makeshlibs:
 	dh_makeshlibs -a -- -c4
 

debian/source/format

@@ -1 +1 @@
-3.0 (native)
+3.0 (quilt)

main.sh

@@ -1,8 +1,15 @@
 #! /bin/bash
+
 set -e
 
+VERSION="24.1.4"
+
+source ./pika-build-config.sh
+
+echo "$PIKA_BUILD_ARCH" > pika-build-arch
+
 # Clone Upstream
-git clone https://gitlab.freedesktop.org/mesa/mesa -b mesa-24.0.4
+git clone https://gitlab.freedesktop.org/mesa/mesa -b mesa-"$VERSION"
 cp -rvf ./debian ./mesa/
 cd ./mesa
 for i in $(cat ../patches/series) ; do echo "Applying Patch: $i" && patch -Np1 -i ../patches/$i || bash -c "echo "Applying Patch $i Failed!" && exit 2"; done
@@ -12,7 +19,7 @@ sed -i ' 1 s/.*/& - PikaOS YellowBirb Mesa Stable/' ./VERSION
 apt-get build-dep ./ -y
 
 # Build package
-
+LOGNAME=root dh_make --createorig -y -l -p mesa_"$VERSION" || echo "dh-make: Ignoring Last Error"
 dpkg-buildpackage --no-sign
 
 # Move the debs to output

main32.sh

@@ -1,21 +0,0 @@
-#! /bin/bash
-set -e
-
-# Clone Upstream
-git clone https://gitlab.freedesktop.org/mesa/mesa -b mesa-24.0.4
-cp -rvf ./debian ./mesa/
-cd ./mesa
-for i in $(cat ../patches/series) ; do echo "Applying Patch: $i" && patch -Np1 -i ../patches/$i || bash -c "echo "Applying Patch $i Failed!" && exit 2"; done
-sed -i ' 1 s/.*/& - PikaOS YellowBirb Mesa Stable/' ./VERSION
-
-# Get build deps
-apt-get build-dep ./ -y
-
-# Build package
-
-dpkg-buildpackage --no-sign
-
-# Move the debs to output
-cd ../
-mkdir -p ./output
-mv ./*.deb ./output/

patches/0004_aco:_Limit_rt_stages_to_128_vgprs.patch

@@ -0,0 +1,44 @@
+From 15f2c9c55318ec28d26f5812fe37f658e38d515d Mon Sep 17 00:00:00 2001
+From: Friedrich Vock <friedrich.vock@gmx.de>
+Date: Sat, 1 Jun 2024 11:57:04 +0200
+Subject: aco: Limit rt stages to 128 vgprs
+
+Totals from 35472 (7.40% of 479373) affected shaders:
+
+MaxWaves: 206239 -> 283776 (+37.60%)
+Instrs: 193922210 -> 202721106 (+4.54%)
+CodeSize: 1056819972 -> 1110833680 (+5.11%); split: -0.00%, +5.11%
+VGPRs: 6026704 -> 4540416 (-24.66%)
+SpillSGPRs: 23742 -> 25754 (+8.47%)
+SpillVGPRs: 118897 -> 2295118 (+1830.34%)
+Scratch: 7201792 -> 152752128 (+2021.03%)
+Latency: 2713432565 -> 3194796286 (+17.74%); split: -0.20%, +17.94%
+InvThroughput: 1052131232 -> 935049835 (-11.13%); split: -16.59%, +5.46%
+VClause: 6972784 -> 8716721 (+25.01%); split: -0.02%, +25.03%
+SClause: 4879313 -> 4852452 (-0.55%); split: -0.88%, +0.33%
+Copies: 32782141 -> 35223995 (+7.45%)
+Branches: 11075847 -> 11094087 (+0.16%); split: -0.00%, +0.17%
+VALU: 118525960 -> 120929058 (+2.03%)
+SALU: 33924572 -> 33973293 (+0.14%); split: -0.03%, +0.17%
+VMEM: 12419116 -> 17104582 (+37.73%)
+Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29593>
+---
+ src/amd/compiler/aco_ir.cpp | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/amd/compiler/aco_ir.cpp b/src/amd/compiler/aco_ir.cpp
+index 05f0745e6a7..b51e30cd2ee 100644
+--- a/src/amd/compiler/aco_ir.cpp
++++ b/src/amd/compiler/aco_ir.cpp
+@@ -94,7 +94,7 @@ init_program(Program* program, Stage stage, const struct aco_shader_info* info,
+    /* apparently gfx702 also has 16-bank LDS but I can't find a family for that */
+    program->dev.has_16bank_lds = family == CHIP_KABINI || family == CHIP_STONEY;
+ 
+-   program->dev.vgpr_limit = 256;
++   program->dev.vgpr_limit = stage == raytracing_cs ? 128 : 256;
+    program->dev.physical_vgprs = 256;
+    program->dev.vgpr_alloc_granule = 4;
+ 
+-- 
+cgit v1.2.3
+

patches/07_gallium-fix-build-failure-on-powerpcspe.diff

@@ -1,35 +0,0 @@
-From a4f14e7239780b02af8d74669c5458d4b0957d4d Mon Sep 17 00:00:00 2001
-From: Roland Stigge <stigge@antcom.de>
-Date: Sun, 2 Mar 2014 19:52:56 +0100
-Subject: [PATCH] gallium: fix build failure on powerpcspe
-
-In the case of powerpc, mesa activates some altivec instructions
-that are unknown on the powerpcspe architecture (see
-https://wiki.debian.org/PowerPCSPEPort), causing a build failure as the
-'vand' opcode is not recognized by the assembler.
-
-This patch fixes this by preventing the PPC-specialcasing in case of
-powerpcspe (__NO_FPRS__ is only defined there).
-
-https://bugs.debian.org/695746
----
- src/gallium/include/pipe/p_config.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/src/util/detect_arch.h
-+++ b/src/util/detect_arch.h
-@@ -70,12 +70,14 @@
- #endif
- #endif
- 
-+#ifndef __NO_FPRS__
- #if defined(__ppc__) || defined(__ppc64__) || defined(__PPC__) || defined(__PPC64__)
- #define DETECT_ARCH_PPC 1
- #if defined(__ppc64__) || defined(__PPC64__)
- #define DETECT_ARCH_PPC_64 1
- #endif
- #endif
-+#endif
- 
- #if defined(__s390x__)
- #define DETECT_ARCH_S390 1

patches/llvm17.patch

@@ -1,106 +0,0 @@
---- mesa/src/gallium/frontends/clover/llvm/invocation.cpp	2023-01-21 08:54:07.903736459 -0400
-+++ invocation.cpp	2023-09-04 14:06:25.213896411 -0300
-@@ -27,13 +27,17 @@
- #include <llvm/IR/DiagnosticPrinter.h>
- #include <llvm/IR/DiagnosticInfo.h>
- #include <llvm/IR/LLVMContext.h>
-+#include <llvm/IR/Module.h>
- #include <llvm/Support/raw_ostream.h>
--#include <llvm/Transforms/IPO/PassManagerBuilder.h>
-+#include <llvm/Transforms/IPO/Internalize.h>
- #include <llvm-c/Target.h>
- #ifdef HAVE_CLOVER_SPIRV
- #include <LLVMSPIRVLib/LLVMSPIRVLib.h>
- #endif
- 
-+#include <llvm-c/TargetMachine.h>
-+#include <llvm-c/Transforms/PassBuilder.h>
-+#include <llvm/Support/CBindingWrapping.h>
- #include <clang/CodeGen/CodeGenAction.h>
- #include <clang/Lex/PreprocessorOptions.h>
- #include <clang/Frontend/TextDiagnosticBuffer.h>
-@@ -439,10 +443,10 @@ clover::llvm::compile_program(const std:
- 
- namespace {
-    void
--   optimize(Module &mod, unsigned optimization_level,
-+   optimize(Module &mod,
-+            const std::string& ir_target,
-+            unsigned optimization_level,
-             bool internalize_symbols) {
--      ::llvm::legacy::PassManager pm;
--
-       // By default, the function internalizer pass will look for a function
-       // called "main" and then mark all other functions as internal.  Marking
-       // functions as internal enables the optimizer to perform optimizations
-@@ -458,19 +462,53 @@ namespace {
-       if (internalize_symbols) {
-          std::vector<std::string> names =
-             map(std::mem_fn(&Function::getName), get_kernels(mod));
--         pm.add(::llvm::createInternalizePass(
-+         internalizeModule(mod,
-                       [=](const ::llvm::GlobalValue &gv) {
-                          return std::find(names.begin(), names.end(),
-                                           gv.getName()) != names.end();
--                      }));
-+                      });
-+      }
-+
-+
-+      const char *opt_str = NULL;
-+      LLVMCodeGenOptLevel level;
-+      switch (optimization_level) {
-+      case 0:
-+      default:
-+         opt_str = "default<O0>";
-+         level = LLVMCodeGenLevelNone;
-+         break;
-+      case 1:
-+         opt_str = "default<O1>";
-+         level = LLVMCodeGenLevelLess;
-+         break;
-+      case 2:
-+         opt_str = "default<O2>";
-+         level = LLVMCodeGenLevelDefault;
-+         break;
-+      case 3:
-+         opt_str = "default<O3>";
-+         level = LLVMCodeGenLevelAggressive;
-+         break;
-       }
- 
--      ::llvm::PassManagerBuilder pmb;
--      pmb.OptLevel = optimization_level;
--      pmb.LibraryInfo = new ::llvm::TargetLibraryInfoImpl(
--         ::llvm::Triple(mod.getTargetTriple()));
--      pmb.populateModulePassManager(pm);
--      pm.run(mod);
-+      const target &target = ir_target;
-+      LLVMTargetRef targ;
-+      char *err_message;
-+
-+      if (LLVMGetTargetFromTriple(target.triple.c_str(), &targ, &err_message))
-+         return;
-+      LLVMTargetMachineRef tm =
-+         LLVMCreateTargetMachine(targ, target.triple.c_str(),
-+                                 target.cpu.c_str(), "", level,
-+                                 LLVMRelocDefault, LLVMCodeModelDefault);
-+
-+      if (!tm)
-+         return;
-+      LLVMPassBuilderOptionsRef opts = LLVMCreatePassBuilderOptions();
-+      LLVMRunPasses(wrap(&mod), opt_str, tm, opts);
-+
-+      LLVMDisposeTargetMachine(tm);
-    }
- 
-    std::unique_ptr<Module>
-@@ -500,7 +538,7 @@ clover::llvm::link_program(const std::ve
-    auto c = create_compiler_instance(dev, dev.ir_target(), options, r_log);
-    auto mod = link(*ctx, *c, binaries, r_log);
- 
--   optimize(*mod, c->getCodeGenOpts().OptimizationLevel, !create_library);
-+   optimize(*mod, dev.ir_target(), c->getCodeGenOpts().OptimizationLevel, !create_library);
- 
-    static std::atomic_uint seq(0);
-    const std::string id = "." + mod->getModuleIdentifier() + "-" +

patches/revert-af1ee8e01044.diff

@@ -1,153 +0,0 @@
-From 0c3587a2f8e1b6cfadf9a4bbb6ae4b2c3e14a651 Mon Sep 17 00:00:00 2001
-From: Leandro Ribeiro <leandro.ribeiro@collabora.com>
-Date: Sun, 10 Apr 2022 22:54:36 -0300
-Subject: [PATCH] Revert "egl/wayland: deprecate drm_handle_format() and
- drm_handle_capabilities()"
-
-Commit af1ee8e010441f8f2ed8c77065b159652a4ac9fe dropped support to
-wl_drm, as we thought that most compositors from active projects were
-already supporting zwp_linux_dmabuf_v1.
-
-But that's not true, so revert this commit in order to give these
-projects a longer transition period.
-
-Note that we didn't add back the support to GEM name API, and that was
-on purpose.
-
-Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
----
- src/egl/drivers/dri2/egl_dri2.h         |  1 +
- src/egl/drivers/dri2/platform_wayland.c | 59 +++++++++++++++++++------
- 2 files changed, 47 insertions(+), 13 deletions(-)
-
-diff --git a/src/egl/drivers/dri2/egl_dri2.h b/src/egl/drivers/dri2/egl_dri2.h
-index 89158993efdd..1c840a966b3c 100644
---- a/src/egl/drivers/dri2/egl_dri2.h
-+++ b/src/egl/drivers/dri2/egl_dri2.h
-@@ -284,6 +284,7 @@ struct dri2_egl_display
-    struct zwp_linux_dmabuf_feedback_v1 *wl_dmabuf_feedback;
-    struct dmabuf_feedback_format_table format_table;
-    bool authenticated;
-+   uint32_t capabilities;
-    char *device_name;
- #endif
- 
-diff --git a/src/egl/drivers/dri2/platform_wayland.c b/src/egl/drivers/dri2/platform_wayland.c
-index e9ecf6d1e716..19fad8bfa08e 100644
---- a/src/egl/drivers/dri2/platform_wayland.c
-+++ b/src/egl/drivers/dri2/platform_wayland.c
-@@ -1344,7 +1344,7 @@ create_wl_buffer(struct dri2_egl_display *dri2_dpy,
-                  struct dri2_egl_surface *dri2_surf,
-                  __DRIimage *image)
- {
--   struct wl_buffer *ret;
-+   struct wl_buffer *ret = NULL;
-    EGLBoolean query;
-    int width, height, fourcc, num_planes;
-    uint64_t modifier = DRM_FORMAT_MOD_INVALID;
-@@ -1448,11 +1448,28 @@ create_wl_buffer(struct dri2_egl_display *dri2_dpy,
-       ret = zwp_linux_buffer_params_v1_create_immed(params, width, height,
-                                                     fourcc, 0);
-       zwp_linux_buffer_params_v1_destroy(params);
-+   } else {
-+      struct wl_drm *wl_drm =
-+         dri2_surf ? dri2_surf->wl_drm_wrapper : dri2_dpy->wl_drm;
-+      int fd, stride;
-+
-+      if (num_planes > 1)
-+         return NULL;
-+
-+      query = dri2_dpy->image->queryImage(image, __DRI_IMAGE_ATTRIB_FD, &fd);
-+      query &= dri2_dpy->image->queryImage(image, __DRI_IMAGE_ATTRIB_STRIDE, &stride);
-+      if (!query) {
-+         if (fd >= 0)
-+            close(fd);
-+         return NULL;
-+      }
- 
--      return ret;
-+      ret = wl_drm_create_prime_buffer(wl_drm, fd, width, height, fourcc, 0,
-+                                       stride, 0, 0, 0, 0);
-+      close(fd);
-    }
- 
--   return NULL;
-+   return ret;
- }
- 
- static EGLBoolean
-@@ -1699,16 +1716,21 @@ drm_handle_device(void *data, struct wl_drm *drm, const char *device)
- static void
- drm_handle_format(void *data, struct wl_drm *drm, uint32_t format)
- {
--   /* deprecated, as compositors already support the dma-buf protocol extension
--    * and so we can rely on dmabuf_handle_modifier() to receive formats and
--    * modifiers */
-+   struct dri2_egl_display *dri2_dpy = data;
-+   int visual_idx = dri2_wl_visual_idx_from_fourcc(format);
-+
-+   if (visual_idx == -1)
-+      return;
-+
-+   BITSET_SET(dri2_dpy->formats.formats_bitmap, visual_idx);
- }
- 
- static void
- drm_handle_capabilities(void *data, struct wl_drm *drm, uint32_t value)
- {
--   /* deprecated, as compositors already support the dma-buf protocol extension
--    * and so we can rely on it to create wl_buffer's */
-+   struct dri2_egl_display *dri2_dpy = data;
-+
-+   dri2_dpy->capabilities = value;
- }
- 
- static void
-@@ -2077,13 +2099,12 @@ dri2_initialize_wayland_drm(_EGLDisplay *disp)
-    wl_registry_add_listener(dri2_dpy->wl_registry,
-                             &registry_listener_drm, dri2_dpy);
- 
--   /* The compositor must expose the dma-buf interface. */
--   if (roundtrip(dri2_dpy) < 0 || dri2_dpy->wl_dmabuf == NULL)
-+   if (roundtrip(dri2_dpy) < 0)
-       goto cleanup;
- 
-    /* Get default dma-buf feedback */
--   if (zwp_linux_dmabuf_v1_get_version(dri2_dpy->wl_dmabuf) >=
--       ZWP_LINUX_DMABUF_V1_GET_DEFAULT_FEEDBACK_SINCE_VERSION) {
-+   if (dri2_dpy->wl_dmabuf && zwp_linux_dmabuf_v1_get_version(dri2_dpy->wl_dmabuf) >=
-+                              ZWP_LINUX_DMABUF_V1_GET_DEFAULT_FEEDBACK_SINCE_VERSION) {
-       dmabuf_feedback_format_table_init(&dri2_dpy->format_table);
-       dri2_dpy->wl_dmabuf_feedback =
-          zwp_linux_dmabuf_v1_get_default_feedback(dri2_dpy->wl_dmabuf);
-@@ -2091,7 +2112,6 @@ dri2_initialize_wayland_drm(_EGLDisplay *disp)
-                                                 &dmabuf_feedback_listener, dri2_dpy);
-    }
- 
--   /* Receive events from the interfaces */
-    if (roundtrip(dri2_dpy) < 0)
-       goto cleanup;
- 
-@@ -2178,6 +2198,19 @@ dri2_initialize_wayland_drm(_EGLDisplay *disp)
- 
-    dri2_wl_setup_swap_interval(disp);
- 
-+   if (dri2_dpy->wl_drm) {
-+      /* To use Prime, we must have _DRI_IMAGE v7 at least. createImageFromFds
-+       * support indicates that Prime export/import is supported by the driver.
-+       * We deprecated the support to GEM names API, so we bail out if the
-+       * driver does not suport Prime. */
-+      if (!(dri2_dpy->capabilities & WL_DRM_CAPABILITY_PRIME) ||
-+          (dri2_dpy->image->base.version < 7) ||
-+          (dri2_dpy->image->createImageFromFds == NULL)) {
-+         _eglLog(_EGL_WARNING, "wayland-egl: display does not support prime");
-+         goto cleanup;
-+      }
-+   }
-+
-    if (dri2_dpy->is_different_gpu &&
-        (dri2_dpy->image->base.version < 9 ||
-         dri2_dpy->image->blitImage == NULL)) {
--- 
-GitLab
-

patches/series

@@ -1 +1,6 @@
+path_max.diff
+src_glx_dri_common.h.diff
 
+#kisak-mesa PPA Backports:
+version
+0004_aco:_Limit_rt_stages_to_128_vgprs.patch

pika-build-config/amd64-v3.sh

@@ -0,0 +1,10 @@
+#! /bin/bash
+export PIKA_BUILD_ARCH="amd64-v3"
+export DEBIAN_FRONTEND="noninteractive"
+export DEB_BUILD_MAINT_OPTIONS="optimize=+lto -march=x86-64-v3 -O3 -flto -fuse-linker-plugin -falign-functions=32"
+export DEB_CFLAGS_MAINT_APPEND="-march=x86-64-v3 -O3 -flto -fuse-linker-plugin -falign-functions=32"
+export DEB_CPPFLAGS_MAINT_APPEND="-march=x86-64-v3 -O3 -flto -fuse-linker-plugin -falign-functions=32"
+export DEB_CXXFLAGS_MAINT_APPEND="-march=x86-64-v3 -O3 -flto -fuse-linker-plugin -falign-functions=32"
+export DEB_LDFLAGS_MAINT_APPEND="-march=x86-64-v3 -O3 -flto -fuse-linker-plugin -falign-functions=32"
+export DEB_BUILD_OPTIONS="nocheck notest terse"
+export DPKG_GENSYMBOLS_CHECK_LEVEL=0

pika-build-config/i386.sh

@@ -0,0 +1,5 @@
+#! /bin/bash
+export PIKA_BUILD_ARCH="i386"
+export DEBIAN_FRONTEND="noninteractive"
+export DEB_BUILD_OPTIONS="nocheck notest terse"
+export DPKG_GENSYMBOLS_CHECK_LEVEL=0

release.sh

@@ -1,8 +1,2 @@
 # send debs to server
-rsync -azP --include './' --include '*.deb' --exclude '*' ./output/ ferreo@direct.pika-os.com:/srv/www/incoming/
-
-# add debs to repo
-ssh ferreo@direct.pika-os.com 'aptly repo add -force-replace -remove-files pikauwu-main /srv/www/incoming/'
-
-# publish the repo
-ssh ferreo@direct.pika-os.com 'aptly publish update -batch -skip-contents -force-overwrite pikauwu filesystem:pikarepo:'
+rsync -azP --include './' --include '*.deb' --exclude '*' ./output/ ferreo@direct.pika-os.com:/srv/www/cockatiel-incoming/