Initial packaging

.github/release-nest-v3

@@ -1 +1 @@
-1
+2

debian/changelog

@@ -1,5 +1,5 @@
-upstream-name (1.0-101pika1) pika; urgency=medium
+niri (0.1.10.1-101pika1) pika; urgency=medium
 
-  * Initial release. (Closes: #nnnn)  <nnnn is the bug number of your ITP>
+  * Initial release.
 
  -- ferreo <harderthanfire@gmail.com>  Wed, 18 Jan 2023 21:48:14 +0000

debian/control

@@ -1,19 +1,13 @@
-Source: upstream-name
+Source: niri
 Section: admin
 Priority: optional
-Maintainer: name <email>
+Maintainer: ferreo <harderthanfire@gmail.com>
 Standards-Version: 4.6.1
-Build-Depends: debhelper-compat (= 13)
+Build-Depends: debhelper-compat (= 13), gcc, clang, libudev-dev, libgbm-dev, libxkbcommon-dev, libegl1-mesa-dev, libwayland-dev, libinput-dev, libdbus-1-dev, libsystemd-dev, libseat-dev, libpipewire-0.3-dev, libpango1.0-dev, libdisplay-info-dev
 Rules-Requires-Root: no
 
-Package: pkgname1
+Package: niri
 Architecture: linux-any
-# Delete any of these lines if un-used
-Depends: ${misc:Depends}, depends
-Recommends: high priority optdepends
-Conflicts: conflicts
-Suggests: low priority optdepends
-Breaks: also conflicts!?
-Provides: provides
-#
-Description: pkgdesc
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Provides: niri
+Description: Scroll wm based on wlroots

debian/niri.install

@@ -0,0 +1 @@
+usr

debian/rules

@@ -3,65 +3,35 @@
 ## See debhelper(7) (uncomment to enable).
 ## Output every command that modifies files on the build system.
 export DH_VERBOSE = 1
+
 export PIKA_BUILD_ARCH = $(shell cat ../pika-build-arch)
+export PATH := $(PATH):/root/.cargo/bin
 
-## === the chain of command ===
-## debuild runs a chain of dh functions in the following order:
-## dh_testdir
-## dh_clean
-## dh_auto_clean
-## dh_update_autotools_config
-## dh_autoreconf
-## dh_auto_configure
-## dh_prep
-## dh_build
-## dh_auto_build
-## dh_install
-## dh_auto_install
-## dh_installdocs
-## dh_installchangelogs
-## dh_perl
-## dh_link
-## dh_strip_nondeterminism
-## dh_compress
-## dh_fixperms
-## dh_missing
-## dh_dwz
-## dh_strip
-## dh_makeshlibs
-## dh_shlibdeps
-## dh_installdeb
-## dh_gencontrol
-## but you are most likely to only need to override the following:
-## dh_clean
-## dh_auto_configure
-## dh_build
-## dh_install
+override_dh_prep:
+# amd64 build prep
+ifeq (amd64-v3,$(PIKA_BUILD_ARCH))
+# Does not support LTO due to dylib-lto
+#export RUSTFLAGS = -C target-cpu=x86-64-v3 -C lto=fat -C embed-bitcode -C codegen-units=1 -C opt-level=3 -Zdylib-lto
+export RUSTFLAGS = -C target-cpu=x86-64-v3 -C opt-level=3
+endif
 
-## === End end of region ===
-
-## === overriding dh functions ===
-## by default all dh functions will run a specific command based on the build system selected by "dh $@"
-## if you have a makefile that does everything you need this is fine,
-## but most likely you have no MakeFile and you want to add your own commands
-## Note : overrides must be places above %:
-## So here's a few examples:
-
-## overriding dh_clean to make it not delete rust vendor files:
-#override_dh_clean:
-#	echo "disabled"
-
-## overriding dh_auto_configure to add custom configs:
-#override_dh_auto_configure:
-#		$(srcdir)/configure -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_DATADIR=/usr/share -DCMAKE_LIBRARY_PATH=/usr/lib/x86_64-linux-gnu -DBUILD_PLUGIN=OFF
-
-## overriding dh_install to install files to a package:
-#override_dh_auto_configure:
-#		mkdir -p debian/pikman/usr/bin
-#		cp pikman debian/pikman/usr/bin/
-
-## === End end of region ===
-
-## This here will start the build:
 %:
 	dh $@
+
+override_dh_auto_install:
+	mkdir -p debian/niri/usr/bin/
+	mkdir -p debian/niri/usr/share/wayland-sessions/
+	mkdir -p debian/niri/usr/share/xdg-desktop-portal/
+	mkdir -p debian/niri/usr/lib/systemd/user/
+	/root/.cargo/bin/cargo fetch
+	/root/.cargo/bin/cargo build --release
+	cp -vf target/release/niri	/usr/bin/niri
+	chmod +x debian/niri/usr/bin/niri
+	chmod 755 debian/niri/usr/bin/niri
+	cp -vf resources/niri-session	debian/niri/usr/bin/niri-session
+	cp -vf resources/niri.desktop	debian/niri/usr/share/wayland-sessions/niri.desktop
+	cp -vf resources/niri-portals.conf	debian/niri/usr/share/xdg-desktop-portal/niri-portals.conf
+	cp -vf resources/niri.service (systemd)	debian/niri/usr/lib/systemd/user/niri.service
+	cp -vf resources/niri-shutdown.target (systemd)	debian/niri/usr/lib/systemd/user/niri-shutdown.target
+	chmod +x debian/niri/usr/bin/niri-session
+	chmod 755 debian/niri/usr/bin/niri-session

main.sh

@@ -6,18 +6,20 @@ set -e
 
 echo "$PIKA_BUILD_ARCH" > pika-build-arch
 
-VERSION="1.0"
+VERSION="0.1.10.1"
 
 # Clone Upstream
-mkdir -p ./src-pkg-name
-cp -rvf ./debian ./src-pkg-name/
-cd ./src-pkg-name/
+git clone --recurse-submodules https://github.com/YaLTeR/niri.git -b v"$VERSION"
+cp -rvf ./debian ./niri/
+cd ./niri
 
 # Get build deps
-LOGNAME=root dh_make --createorig -y -l -p src-pkg-name_"$VERSION" || echo "dh-make: Ignoring Last Error"
 apt-get build-dep ./ -y
+apt-get install curl -y
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | CARGO_HOME=/root/.cargo sh -s -- -y
 
 # Build package
+LOGNAME=root dh_make --createorig -y -l -p niri_"$VERSION" || echo "dh-make: Ignoring Last Error"
 dpkg-buildpackage --no-sign
 
 # Move the debs to output